Arranged a grand wash, put the laundry in the drum of your assistant, indispensable in the home. Installed the selected program. And as a result, a failure is displayed on its screen, with a combination of the abbreviation F12. According to the results of the work, it is audible that the pump does not pump water into the tank, or is trying to pump it, and at the same time creates characteristic sound effects, since it works like with obstacles (in the jerky mode). If such a malfunction is displayed for the first time, then it can be displayed in any established mode, without an obvious pattern. However, in the future, such a breakdown will glow on the display immediately after switching on.
How to determine the problem if the manufacturer does not provide a display in the unit. Notification for such devices is carried out using LED illumination, depending on its modification:
- LED bulbs are constantly lit, indicating the functions of delaying washing, super washing, or the indicator lamp for selecting the rpm is blinking.
Fault Cipher Value
Malfunction F12 of the unit indicates the absence of a connecting circuit in the control unit. The indicator board that does not receive a command from the module responsible for controlling the entire unit signals a malfunction.
How to determine the error code from the burning indicators, read here.
F12 failure, how to repair it without professional help
- The washing machine software failed. Fault F12 you discovered for the first time. To eliminate it, you must necessarily perform a forced reboot. Pull the plug out of the socket. Leave the device without power for up to 10 minutes and plug it in. As a result of the shutdown, all modes should be reset (software reboot) and the device should work, and the problem should be resolved.
- Break contact connections responsible for the operation of the control unit, consisting of two display and control boards. Inspect all pins (disconnect and reconnect all loops).
Fulfilled all the above recommendations? And the machine didn’t work like that, besides, didn’t the error be reset? Then you need to call specialists - masters of repair of washing machines Indesit.
Also read in our article about the meaning F20 errors in Bosch washing machine.
I turn on the SM in the network. Silence, even the bulbs do not light. After about 3 minutes, all the upper lights blinked, and the spin and drain light constantly. I found out on an Internet error F12. I tried all the reboot options several times. I thought everything, I need to get to the module. He removed the top roof of the SM, decided to clean the contacts of the board where the buttons are, from the plug with 4 wires, wiped, cleaned, bent. Connect to the network, OK, everything